Oil Chillers ( APISTE VSC SERIES ) company.name }} /> Terlengkap

The oil chiller is a unit which performs cooling of the hydraulic oil, lubricating oil and cooling oil of machine tools. In various parts of the machine tool spindles the bearings and gears get overheated and thermal deformation occurs due to the high speed rotational impact. Then the displacement of the shaft affects the machining accuracy. Also, as a result of the temperature rising of the hydraulic oil of the actuator, impact on the machining accuracy resulting from oil degradation due to changes in speed is also a reason for concern. The Apiste Oil Chiller performs cooling down by circulating oil and thus prevents oil temperature rise. The environmental resistance is also significantly improved compared with conventional units. Even at times when a lot of oil mist gets scattered, this product demonstrates the capability of being "dirt resistant" and "able to retain its functionalities even when getting dirty". Air-Cooled The oil chilling VSC series features unparalleled durability surpassing anything else. Provides high cooling capacity even in hot production factories and processing plants where oil mist and dust are abundant. In order to prevent trouble such as the cooling fan getting clogged quickly, which might lead to performance decline and failure, the heat dissipation fan motor speed is controlled depending on the operating conditions. In order to reduce the rpm by a maximum of 70%, it is possible to significantly reduce the amount of oil mist or dust aspired in comparison with when it is always rotating at 100%. Also, its loaded with super heat control which regulates the flow rate of refrigerant to the cooling device according to the situation in order to take full advantage of the cooling device's power. This algorithm which controls the perfect balance of the refrigerating cycle under any environmental conditions properly controls oil temperature under even extremely tough conditions.